Huawei IAD108A User Manual page 197

User Manual
U-SYS IAD108 Integrated Access Device
IAD2000(config)#infoswitch
diagnose on
{ <cr>|syslog<K>|oprlog<K>|trace<K>|stat<K>|other<K> }:
Command:
diagnose on
IAD2000(config)#
Note:
Operator who maintains the system through the serial port has a fixed Client ID of 1,
and the IP address displays as 0.0.0.0.
II.
Setting Information Output Level
By setting the information output switch, you can control the
level of information to be outputted to a certain terminal.
Table 7-2 Related commands
Operation
Set the information output level for
command line
Set the information output level for NMS
Set the information output level for log host
cli
infoswitch cli
7-9
Chapter 7 Maintaining System
3 alarm on
3 alarm on
Command
IAD2000(config)#infolevel cli
IAD2000(config)#infolevel nms
IAD2000(config)#infolevel syslog
debug on
debug on