Huawei IAD108A User Manual page 154

User Manual
U-SYS IAD108 Integrated Access Device
Note:
Ports of the IAD108 are 10/100Base-TX Ethernet ports, supporting baud rates of both
10 Mbit/s and 100 Mbit/s. They can work in half-duplex, full-duplex and auto
negotiation modes. The default working mode is the auto negotiation mode.
Example:
Set port 2 with flow control and port 3 without.
IAD2000(lanswitch)#flow-control 2
IAD2000(lanswitch)#no flow-control 3
IAD2000(lanswitch)#
Example:
Set network ports 2 and 3 of the IAD108 into one VLAN, of which
the VLAN tag is 1. Set network ports 4 and 5 into another VLAN, of
which the VLAN tag is 2. In this case, the data users accessed from
network ports 4 and 5 cannot visit those accessed from ports 2 and 3.
IAD2000(lanswitch)#vlan 1 interface 2 3
{ <cr>|interface-num<U><1,5> }:
Command:
IAD2000(lanswitch)#vlan 2 interface 4 5
{ <cr>|interface-num<U><1,5> }:
Command:
IAD2000(lanswitch)#
vlan 1 interface 2 3
vlan 2 interface 4 5
5-17
Chapter 5 Advanced
Configuration