Huawei IAD108A User Manual page 198

User Manual
U-SYS IAD108 Integrated Access Device
Operation
Set the information output level for
Web-based NMS
Show the information output level for the
command line
Show the information output level for the
NMS
Show the information output level for the
Log host
Show the information output level for the
Web-based NMS
1) Descriptions of commands
To set information output level, first turn on the information
output switch, and then control the output level of the
information.
The higher the level is, the more important the information
is.
Once a level is set, other information with a higher level will
be outputted to the specified terminal.
The default output level is 0, which means all the
information will be exported.
You can set in one time the level of multiple types of
information to be outputted to the same terminal.
2) Usage example
Set the output level of syslog to NMS SZ-CNC-WS_1 as 3, and
set the output levels of alarm, debugging and diagnosis information
to command line terminal with Client ID 3 to 1, 2 and 3 respectively.
Chapter 7 Maintaining System
IAD2000(config)#infolevel www
IAD2000>show infoswitch cli
IAD2000>show infolevel nms
IAD2000>show infolevel syslog
IAD2000>show infolevel www
7-10
Command