Huawei IAD108A User Manual page 103

User Manual
U-SYS IAD108 Integrated Access Device
After the SNTP client is configured, you can use the command
show sntp status in privilege mode to check it.
Example: Start SNTP client on the IAD108, specifying the name
of the SNTP server as "SNTP-SVR", time zone as East 8, and
synchronization interval as 60 seconds.
IAD2000(config)#sntp server name sntp-svr.tele.com
IAD2000(config)#sntp time-zone + 8
IAD2000(config)#sntp interval 60
IAD2000(config)#show sntp status
------------------------------------------------------
-
NTP server:
Local time zone : +8
Synchronization interval : 60Sec.
------------------------------------------------------
-
IAD2000(config)#
sntp-svr.tele.com
4-27
Chapter 4 Configuring Data