Huawei IAD108A User Manual page 162

User Manual
U-SYS IAD108 Integrated Access Device
mgcip2:1.1.1.1
mgc-domain-name2:huawei1.com
IAD2000(config)#
Table 5-14 lists the commands used to configure backup MGC.
Table 5-14 Related commands
Operation
Turn on the switch for
configuring backup MGC
Configure the standby MGC
Query MG
parameter
Display the MGC
Table 5-15 lists the parameters of the related commands and their
meanings
Table 5-15 Parameter description
Item
The IP address or the domain name of the standby MGC. It must be
mgcip consistent with that actually configured to the standby MGC. The
domain name is a character string of 1–60 characters.
The port number of transmission layer protocol. With MGCP, only text
mgcport
coding is supported and the default port number is 2727.
IAD2000(config)mg software-parameter name
value
IAD2000(config)mg backup {mgcip mgcip |
mgcport
mgc-domain-name }
software
IAD2000>show mg software-parameterr
IAD2000>show mg mgc
Command
mgcport
Description
5-25
Chapter 5 Advanced
Configuration
mgcport2:2222
| mgc-domain-name