Huawei IAD108A User Manual page 291

User Manual
U-SYS IAD108 Integrated Access Device
Command name
spc modify
spc release
speed
startservice
system set aulaw
T
tag disable
tag enable
tag vlanid
telnet
temperature-limit
terminal hold
terminal timeout
terminal type
timeout
Function
Modifying an SPC.
Releasing an SPC.
Setting the rate of the LAN
Switch's network interface.
Starting the service.
Setting DSP A/µ law.
Prohibiting the setting of VLAN
label.
Enabling the setting of VLAN
label.
Setting the VLAN label.
Logging in the host via telnet
mode.
Setting the temperature threshold
for starting the fan.
Locking the user terminal.
Enabling the function that when
the terminal timeouts, it will exit
from the system.
Configuring the terminal type as
ANSI/VT100.
Turning on the terminal timeout
control switch.
A-15
Appendix A Command List
Mode
Global Config
Global Config
LAN Switch
Global Config
Advance
Global Config
Global Config
Global Config
User
Global Config
User
User
User
User