Huawei IAD108A User Manual page 239

User Manual
U-SYS IAD108 Integrated Access Device
Table 7-15 Parameters of command
Item
datebegin Begin date. Input format: yyyy-mm-dd.
timebegin Begin time. Input format: hh:mm:ss.
dateend End date. Input format: yyyy-mm-dd.
timeend End time. Input format: hh:mm:ss.
The alarm number from which the display starts, the value range is
startnum 1–1000. In the Command Line Interface (CLI), you can start the
display from 1, or from a designated startnum.
Maximum number of alarm records after the startnum that can be
number
displayed in one time. It is an optional parameter, ranging 1–1000.
VII.
Querying Latest Alarms
Command: show alarm record all
You can use this command to query all the latest alarms
conveniently.
Note:
The IAD108 stores 500 alarm records. If you need to query the alarms that occurred
even earlier, you can find them in the database on the NMS.
Chapter 7 Maintaining System
Description
7-51