User Manual
U-SYS IAD108 Integrated Access Device
II.
Showing Client
Sometimes you may need to know from which terminal an
operator has logged in, the IP address of the terminal, and the Client
ID. In this case, you can run the command show client.
Example: Show the information of login operator:
IAD2000> show client
------------------------------------------------------
-
Client ID
------------------------------------------------------
-
1
root
2
huawei
3
aaa
4
bbb
------------------------------------------------------
-
IAD2000(config)#
Note:
Operators who maintain the system through the serial port have a fixed Client ID of
1, and the IP address displays as 0.0.0.0.
Client Name
0.
0.
0.
172. 21. 50. 8
172. 21. 50. 13
172. 21. 50. 6
7-24
Chapter 7 Maintaining System
IP Address
0
2004-08-17 11:58:45
2004-08-17 12:21:45
2004-08-17 12:21:52
2004-08-17 12:22:06
Login Time