Chapter 6 Troubleshooting; Hx200 Leds; Satellite Router Leds - Hughes HX200 Installation Manual

HX200 LEDs

This chapter provides general troubleshooting procedures,
including how to use the HX200 satellite router light-emitting
diodes (LEDs) to troubleshoot problems with the unit.
This chapter contains the following troubleshooting topics:
• HX200 LEDs on page 73
• Connectivity problems on page 78
• Cannot access the System Control Center on page 78
• Cannot access network resources on page 79
• No browsing issues on page 85
• Hot cable connector on page 85
• Slow transmission speed or intermittent operation on page 86
As shown in Figure 45, the HX200 has five LED indicators on its
front panel that can be used for troubleshooting and fault
isolation. If you cannot access the System Control Center, use the
front panel LEDs to troubleshoot by following the procedures in
this section in sequence.
Figure 45: Satellite router LEDs
The functions of the LED indicators are:
1038054-0001 Revision A.04 - Inspection Draft
Troubleshooting
Chapter 6 • Troubleshooting
Chapter 6
73