Enabling and disabling the
The Firewall Statistics page
Once firewall rules have been created, you can enable the
firewall
firewall. You can also disable the firewall at any time.
• To enable the firewall, select the
located in the upper left corner of the firewall rule list, then
click Submit.
• To disable the firewall, clear the
located in the upper left corner of the firewall rule list, then
click Submit.
The Firewall Statistics page shows:
• The firewall status (enabled or disabled)
• The number of packets processed by the firewall
• The number of packets discarded by the firewall
• The number of packets discarded by each firewall rule
The three packet-count statistics are the number counted since the
last time the Clear Counters button was clicked.
Enable Firewall
Chapter 5 • The System Control Center
1038054-0001 Revision A.04 - Inspection Draft
checkbox
Enable Firewall
checkbox
65