Optional Features; Firewall Configuration Page; Firewall Configuration Page - Hughes HX200 Installation Manual

Optional Features

Pages

Firewall Configuration page

The HX200 satellite router has two optional features that can be
enabled for configuration through the System Control Center.
When configuration at the System Control Center is enabled,
links to configuration screens related to these features appear in
the left area of the main pages. The optional features are:
• Firewall
• Port Forwarding
A screen for viewing firewall statistics is also available when the
firewall option is enabled. Note that the port forwarding option
can only be configured when network address port translation
(NAPT) has been enabled for the HX200 at the HX system
gateway.
When remote firewall configuration for a satellite router is
allowed at the system gateway, links for viewing Firewall
Configuration and Firewall Statistics pages appear in the
navigation area of the four main System Control Center pages.
The Firewall Configuration
Configuration page shown in Figure 36.
TO BE REPLACED
Figure 36: Firewall configuration page
link opens the Firewall
Chapter 5 • The System Control Center
1038054-0001 Revision A.04 - Inspection Draft
61