Mobility; Signal And Data Interfaces; Mechanical; Satellite Router Specifications - Hughes HX200 Installation Manual

Signal and data interfaces

Mechanical

Satellite router
specifications
Product element
Physical Interfaces
Satellite Specifications
Outbound Channel
Outbound Rate
Outbound Modulation
Outbound Coding
Inbound Channel
information on the compliant outroute and ratios, please see
Table 10 on page 97 and Table 11 on page 98.
The HX200 supports outroute symbol rates less than 1Msps.

Mobility

The HX200 provides doppler compensation for radial speeds up
to 150 mph.
The following signal and data interfaces are supported:
• Dual 10/100 Ethernet LAN ports with Auto-MDIX support,
configurable as a two-port switch or as two independent LAN
segments
• EIA-232 receive and transmit ports for control signaling in
Maritime applications
• EIA-232 receive and transmit ports for communication to a
GPS terminal
• EIA-232 debug port (stuffing option)
• 10MHz reference circuitry allows simultaneous receive and
transmit of 10MHz reference to/from the rear panel
– 10MHz reference clock output
– 10MHz reference clock input
• 100 to 253V AC input through detachable power cord
• 48V power supply DC voltage input port for supporting >
5W radios
The HX200 includes an industry standard 1U rack-mountable
enclosure.
Table 5 lists the specifications for the HX200 satellite router.
Table 5: HX200 satellite router specifications
Two 10/100 BaseT Ethernet LAN RJ45 ports (independent subnets)
One Serial Port (RS-422 or RS-232)
DVB-S2 with Adaptive Coding and Modulation
1-45 Msps (in 0.5 Msps steps)
QPSK, 8PSK (Adaptive Modulation)
BCH with LDPC 3/5, 1/2, 2/3, 3/4, 5/6, 8/9, 9/10 (Adaptive Coding)
IPoS (FDMA/TDMA)
Specification
1038054-0001 Revision A.04 - Inspection Draft
Chapter 1 • Introduction
5