Failed Ping; Successful Ping - Hughes HX200 Installation Manual

Chapter 3 • Commissioning the HX200 satellite router
24
1038054-0001 Revision A.04 - Inspection Draft
c. Press E .
NTER
A successful ping test is shown in Figure 10.
Figure 10: Successful ping
A failed ping test is shown in Figure 11. If the ping test fails,
make sure that the installer laptop Network Interface Card
(NIC) is properly installed and that the installer laptop is
properly configured to use DHCP. See Appendix A for more
information.
Figure 11: Failed ping
If the NIC is installed properly and the installer laptop is
configured properly, make sure all cable connections are
secure. (See the Caution statement that follows Figure 3 on
page 11.) If all cable connections are secure:
– Shut down and power off the satellite router.
– Shut down and power off the installer laptop.
– Turn the satellite router back on.
– Turn the installer laptop back on.