TO BE REPLACED
Figure 19: Receive pointing
8. To view a graphic representation of the current signal quality,
click Display Signal Strength.
Note: If the Signal Quality window is not visible on the
display, minimize the other windows until you can see it.
9. Peak the receive pointing as instructed in the antenna
installation manual.
Note: You must peak the signal even when the antenna is
locked to it.
10. After peaking the signal, click Close to close the Signal
Quality window.
11. Click Next.
Chapter 3 • Commissioning the HX200 satellite router
1038054-0001 Revision A.04 - Inspection Draft
33