Installation And Commissioning - Hughes HX200 Installation Manual

Product element
Inbound Channel Rate
Inbound Channel
Modulation
Inbound Channel
Coding
Bit Error Rate (Receive) 10
Bit Error Rate
(Transmit)
Interface to ODU
Mechanical and Environmental
Weight
Width
Height
Depth
Safe operating
temperature range
Safe operating humidity
range
Safe altitude
Cooling method
Main processor
Main memory
Flash memory
Protocol support
Interfaces/ports
Installation and
commissioning
Chapter 1 • Introduction
6
1038054-0001 Revision A.04 - Inspection Draft
Table 5: HX200 satellite router specifications (Continued)
256, 512, 1024, 2048 ksps
OQPSK
Rate 1/2, 2/3, 4/5 with TurboCode (Adaptive Coding)
-10
or better
-7
10 or better
Industry standard BUC (L-Band) or Hughes saturated carrier BUC
2.4 lb (1.089 kg)
1.7 inch (4.32 cm)
4.5 inch (11.43 cm) with pedestal base
9.5 inch (24.13 cm)
9.75 inch (24.77 cm) with pedestal base
10.5 inch (26.67 cm)
5 to 40°C (Above 5000 ft altitude, reduce maximum temperature by 1°C per
1000 ft)
5% to 95% non-condensing
10,000 ft
Convection
300 MHz
64 Mbyte
16 Mbyte
TCP/IP (Transmission Control Protocol / Internet Protocol) protocol suite
Two Ethernet ports supporting 10BaseT or 100BaseT operation, RJ45-switched
Telephone line port
The installation and commissioning of the HX200 satellite router
is a multi-step process involving two pieces of equipment—the
HX200 satellite router and the associated transport device. The
workflow and chapter reference numbers for the process steps
follow.
1. Preparing the satellite router for installation
Chapter 2 on page 9
2. Assembling the HX200 satellite router
Chapter 2 on page 9
3. Commissioning the HX200 satellite router
Chapter 3 on page 15
Specification