Updating The Satellite Router Software; Saving The Utility On The Installer Laptop - Hughes HX200 Installation Manual

Updating the satellite router software

Saving the utility on the
installer laptop
This appendix explains how to use the Fallback Updater utility to
update the satellite router
software release. Use the procedures in this appendix only when
instructed to do so by Hughes.
The following topics are discussed:
• Saving the utility on the installer laptop on page 101
• Configuring the TCP/IP properties on the installer laptop on
page 102
• Updating the fallback.bin file on page 109
• Troubleshooting the update on page 110
Before updating the
fallback.bin
satellite router, you must first copy the Fallback Updater utility to
the installer laptop. The utility is distributed to installers in an
e-mail message and is available for download from the Hughes
installation support web site. Contact Technical Support for the
web site address, if necessary.
Follow these steps to save the Fallback Updater utility on the
installer laptop:
1. Obtain the self-extracting file containing the Fallback
Updater utility and its supporting files from either the e-mail
message or the installation support web site.
2. Copy the self-extracting file to the installer laptop.
Appendix C • Updating the satellite router software
1038054-0001 Revision A.04 - Inspection Draft
Appendix C
file with the current
fallback.bin
file and installing the
101