Gateway Tab - Windows 98Se And Me - Hughes HX200 Installation Manual

3. On the IP Address tab, select the
radio button.
automatically
4. Select the
Gateway
selecting them and clicking Remove. See Figure 55.
Figure 55: Gateway tab - Windows 98SE and Me
5. Select the Disable DNS radio button on the
tab.
Configuration
6. Select OK to accept the updates for the TCP/IP properties.
7. Select OK to close the list of network components. Windows
may request the installation CD-ROM to complete updating
the TCP/IP settings.
8. Restart the computer if it does not do so automatically.
Appendix A • Configuring a Windows computer to support DHCP
1038054-0001 Revision A.04 - Inspection Draft
Obtain an IP address
tab. Remove any installed gateways by
DNS
95