Windows 2000; Network And Dialup Connections - Windows 2000 - Hughes HX200 Installation Manual

Windows 2000

Appendix A • Configuring a Windows computer to support DHCP
90
1038054-0001 Revision A.04 - Inspection Draft
7. Ensure that both
Obtain an IP address automatically
Obtain DNS server address automatically
selected. If not, select them.
8. Select OK to close the open dialog boxes and finish the
configuration.
9. Restart the computer even if Windows does not require you
to do so. This ensures that the network settings are
automatically reset.
1. On the client computer Windows desktop, select
Settings→ Control Panel
Dial-up Connections
2. A list of network connections appears as shown in Figure 49.
The
Local Area Connection
it does not, the network is not installed correctly.
Figure 49: Network and Dialup Connections - Windows 2000
3. Right-click the
Local Area Connection
the terminal network connection and select
the popup menu. The Local Area Connections Properties
window appears as shown in Figure 50.
options are
and double-click
Network and
.
icon must appear on the page. If
icon that represents
and
Start→
from
Properties