Transmission Information Page - Hughes HX200 Installation Manual

Transmission
Information page
Chapter 5 • The System Control Center
52
1038054-0001 Revision A.04 - Inspection Draft
The Transmission Information page shown in Figure 32 displays
satellite router transmit data such as transmit status, the number
of packets submitted for transmission, the number of successful
transmissions, and the number of failed transmissions. Each of
these fields is described below.
Figure 32: Transmission Information page
•
Transmit status –-
path. Click on the blue status message to display relevant
Help information. Transmit status messages on page 53
describes the associated TxCodes in detail.
•
Number of successful transmissions –-
of frames transmitted to the satellite.
•
Number of failed transmissions –-
frames that could not be sent. A continuously increasing
value indicates a transmit problem. However; a low number
of failed transmissions is no reason for concern, as long as the
number does not increase and the system is functioning
properly.
•
Number of packets submitted for transmission –
total amount of data queued for transmission to the satellite.
Provides the status of the transmit data
Reports the number
Reports the number of
Indicates the