Redline RDL-3000 SC User Manual page 96

RDL-3000 FAMILY
Upgrade Steps
Important; The RDL-3000 firmware binary file must be located in the default upload
directory of the TFTP/FTP server.
Login to the RDL-3000 Web interface and click Utilities ->
1.
menu.
Select TFTP or FTP, enter the IP Address of the server, and enter the full name of
2.
the binary file (including the .bin extension). If FTP is selected, enter account name
and password.
Click Upload File to begin the file transfer. The transfer may require up to eight
3.
minutes based on the data transfer rate. Do not interrupt the transfer process.
When the transfer is complete, the RDL-3000 checks the integrity of the uploaded file
and registers a status message in the event log. If errors were introduced during the
transfer process, the firmware file is discarded and the upload must be repeated.
When the transfer has completed successfully, click the Change Version button to
4.
select the firmware version to load on the next system reboot.
70-00158-01-08
USER MANUAL
Proprietary Redline Communications © 2011
Firmware
in the main
Page 96 of 150 December 7, 2011