Enable; Disable; Freq - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
ssl_key_<mac>.pem SSL Key.
usr_wcert_<mac>.der** X.509 Certificate: The unit X.509 certificate that
has been signed by the CA. This certificate includes the unit's public key.
usr_wkey_<mac>.der Private Key: This certificate includes the unit's private
key. The private key must be kept secret and not shared with anyone. The
data used to create the keys should also be stored in a secure area.
usr_wacert_<mac>.der X.509 Certificate Authority: The root CA X.509
certificate for the product. The same certificate is used for all units.
The <mac> portion is the MAC address of the board.
For example: dsa_key_00-09-02-00-01-02.pem
mode <usr | factory>
Specify the type of information to display.
usr User entered files (default if type is not specified).
factory - Factory default files (requires hardware jumper selection).
fips - Not available in this software version.
folder <usr | factory>
Remove all files from the specified table.
usr - User entered files (default).
fips - Not available in this software version.
id <id>
Remove a Service Group, Service, or Link table entry.
id

4.3.6 enable

Use the enable command to enable a Service Group, Service, or Link).
enable <id>
Enable a specific ID.
id Unique number for Service Group, Service, or Link.

4.3.7 disable

Use the disable command to disable a Service or Link (not applicable to Service
Groups).
disable <id>
Disable a specific ID.
id Unique number for Service or Link.

4.3.8 freq

Use the freq command to configure frequency ranges when using autoscan or DFS.
freq <add> <clearall> <del> <print> <reload>
add <begin> <end>
Add a frequency range (up to 32 ranges).
begin - start frequency (MHz)
end - end frequency (MHz)
clearall
Delete all entries from the frequency list.
del <idx>
70-00158-01-08
USER MANUAL
Unique number for Service Group, Service, or Link.
Proprietary Redline Communications © 2011 Page 100 of 150 December 7, 2011