Subscriber Link Configuration; Basic Subscriber Link Configuration; Fig. 44: Web - Subscriber Link Configuration Screen - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY

Subscriber Link Configuration

Use this screen to display and modify settings for a Subscriber Link. Click Provisioning-
> New Subscriber Link
existing Subscriber Link, click Provisioning->
click on the name of the subscriber Link.

Basic Subscriber Link Configuration

Link Type: Select the type of Link configuration.
Normal Link: Define a link configuration to be applied only for the subscriber with the
network address matching the Subscriber MAC field.
Template: Define a link configuration to be applied for any subscriber providing the
matching template name (STID) and password (STID Password).
The STID template feature allows an RDL-3000 subscriber and sector controller to
establish a wireless link without pre-registering the subscriber MAC address. This
can be used for nomadic subscribers, temporary installations, or to simplify
deployments of large numbers of subscribers with similar link requirements.
During the registration process, the subscriber provides the name and password of a
template stored in the sector controller. If the name and password match an existing
template, the link is established using the settings in that template. Multiple
subscribers may specify the same template.
70-00158-01-08
USER MANUAL
in the main menu to add a new Subscriber Link. To edit an

Fig. 44: Web - Subscriber Link Configuration Screen

Proprietary Redline Communications © 2011
Subscriber Links in the main menu and
Page 74 of 150 December 7, 2011