RDL-3000 FAMILY
STID: Enter a name for this template
(e.g., RAP-Eng-Unit)
STID Password: Enter the authentication password for this STID template
(e.g., RAP-004)
Set any advanced parameters as required.
Click Apply and then Save All.
Step 3: Create a RAP Service Group
The RAP wireless link can be associated with any existing Service Group. If required,
create a new Service Group.
Step 4: Create a Service for this STID
Click Provisioning -> New Service.
Enter data for the following fields:
Name: Enter the name for this service
(e.g., RAP-Serv-1).
Tagging mode: Select the VLAN mode
(e.g., Pass through).
Parent Subscriber Link: Select the link template (e.g., RAP-Eng-Link).
Parent Service Group: Select the Service Group (e.g., RAP-Group-4).
Set any other fields as required.
Click Apply and then Save All.
70-00158-01-08
USER MANUAL
Fig. 61: App. - RAP - SC Link Template Configuration
Proprietary Redline Communications © 2011
Page
147
of 150
December 7, 2011