Redline RDL-3000 SC User Manual page 114

RDL-3000 FAMILY
For example: Set the primary RADIUS server IP address and then set the
mode <1 | 2> <off | on>
Mode of RADIUS server.
port <1 | 2> < 1-9999 >
Listening port address on RADIUS server (default port is 1812).
retries <1 | 2> < 1-999 >
Maximum number for attempts to contact target RADIUS server.
secret <1 | 2> < text >
Password for RADIUS server. Must conform to security policy.
timeout<1 | 2> < 1- 90 >
Time to wait for response from RADIUS server (seconds).
redundancy <peerip> <role> <timeout>
Use the following settings to configure the 1+1 redundancy option for the sector
controller. This feature is enabled by the options key.
peerip: Enter the IP address of the other sector controller:
role: Define the function of this sector controller:
timeout: Enter the period (5-60s) to wait when no response is received from the
regper <4 - 100>
The number of frames between registrations.
rffreq <rf1 | rf2> <frequency>
Center frequency (MHz) for the RF channel. Sites operating in close proximity should
minimize interference by using a factor of the channel size for separation. For
example, 20 MHz channels should have >20 MHz separation.
rf1 - Set the frequency for RF port 1.
rf2 - Set the frequency for RF port 2.
frequency - Enter the Tx frequency (4900 - 5875).
schcycle <1-20>
Set the scheduling cycle. The period determines the amount of data to be sent on a
Service or Service Group during each scheduling cycle. Enter scheduling cycle (ms).
snmp < none | v2 | v3 >
Select the mode of the SNMP agent and the version. This selection is exclusive
(e.g., selecting v3 excludes support of v2c).
none - Disable the SNMP agent.
v2 - Enable SNMP v2c support.
v3 - Enable SNMP v3 support.
70-00158-01-08
2 - Secondary RADIUS server.
secondary RADIUS server IP address:
set radius ip 1 192.168.100.50
set radius ip 2 192.168.100.51
off - Disable RADIUS server.
on - Enable RADIUS server.
none: Redundancy mode is disabled.
primary: This unit is Backup and peer Primary SC is active.
backup: This unit is Primary and peer Backup SC is active.
peer SC.
Proprietary Redline Communications © 2011
USER MANUAL
Page 114 of 150 December 7, 2011