Page 1
To install radio software, you will need an FTP/TFTP server running on your computer. TFTP works fine for ● local connections; however, FTP works better over live networks. To run command lines on RDL-3000 TVWS radios you will need Telnet running on your computer, PuTTY or ● Microsoft or equivalent.
Page 2
PROCEDURE Software Upgrade Using the Web Interface: 1. Login to the unit, navigate to “Utilities” and click “Firmware”. Enter the IP address of the TFTP server and the full name of the PMP software file including the binary extension (.sbin). When using FTP the operator must also enter the FTP account name and password.
Page 3
3. Verify the radio is running the latest software version by logging in and seeing the version in the Web interface banner. Install Permanent Option Key and Token Using Web Interface: 1. Using the radio’s serial number or MAC address find the permanent option key that was generated for this radio.
Page 4
2. Click “Product Options” and enter the PMP-enabled options key (copy and paste) in “Options Key 1” or “Options Key 2” field. Select the appropriate key in the “Active Options Key” field and click “Activate Key” to validate and activate the new key. 3.
Page 5
4. Using the radio’s serial number or MAC address find the access token that was generated for this radio. Click “Product Options” and enter the “Access Token” field (copy and paste) and “Activate” token. 5. When Access Token is activated the system log file will be displayed. POWERFUL.
Page 6
TVWS Configuration to Access Spectrum Administrator Using Web Interface: 1. Click “System” to configure “Basic Network Configuration”. You will need an IP address that is routable out of the network, Default Gateway, and DNS. The default DNS is 8.8.8.8 and 8.8.4.4. 2.
Page 7
Wireless Configuration: 1. Click “Wireless” and enter “Antenna Gain” that radio will be using. 2. The radio will display the contiguous channels and center frequency based on selected channel size under “Basic Wireless Configuration”. After successful connection and registration to TVWS Database the allowed contiguous channels will be in black font with center frequency and the not allowed contiguous channels will be in red font.
Page 8
(Ellipse). To learn how to configure the subscriber radio to communicate with base station radio go to https://rdlcom.com/resources/ click “All Videos”, then click “Training Videos”. Watch “RDL-3000 Basic Link Configuration”. POWERFUL. VERSATILE. RELIABLE.
Page 9
BASIC TVWS DATABASE CONNECTIVITY TROUBLESHOOTING Server Connectivity Status Failure: 1. Check Ethernet port is connected with no duplexing issues between Ethernet switch/router and RDL-3000 radio. Force Ethernet port on RDL-3000 and Ethernet switch/route to 100Mbps Full Duplex. 2. Check radio is using a routable IP address.