Redline RDL-3000 SC User Manual page 102

RDL-3000 FAMILY
ethsts
Speed and duplex settings for the Ethernet port.
etxpkt
Number of Ethernet packets transmitted.
exit
Exit from the current mode (also CTRL-Z).
gpssts
Status of the GPS device.
grpoir <id>
Get the Offered Information Rate (OIR) for the specified service Group.
id
idenable <id>
Check the status of a Link, Service, or Service Group.
lactive <id>
Link active status.
ldlblk
Downlink total blocks.
ldlbr
Downlink burst rate.
ldldblk
Downlink discarded blocks.
ldllfr
Downlink lost frames.
ldlrblk
Downlink retransmitted blocks.
ldlrssi
Downlink RSSI for RF port 1. In SISO mode, this is always the value of the active RF
port.
ldlrssi2
Downlink RSSI for RF port 2. In SISO mode, this is always the value of the active RF
port.
ldlsnr
Downlink SINADR for RF port 1. In SISO mode, this is always the value of the active
RF port.
ldlsnr2
Downlink SINADR for RF port 2. In SISO mode, this is always the value of the active
RF port.
llostc
Wireless link lost.
lrcon
Number of Services provisioned on this Link.
70-00158-01-08
USER MANUAL
Index value of the Service Group
Proprietary Redline Communications © 2011 Page 102 of 150 December 7, 2011