Redline RDL-3000 SC User Manual page 117

RDL-3000 FAMILY
srvgid <id> <gid>
Assign a Service Group to this Service.
id - Service ID number.
gid - Service Group ID number.
srvgid <id> <lid>
Assign a Link to this Service.
id - Service ID number.
lid - Link ID number.
srvpri <id> <pri>
Assign a default VLAN priority to this Service.
id - Service ID number.
pri - Assign a priority (0-7).
srvvid <id> <vlan_id>
Assign a VLAN ID to this Service.
id - Service ID number.
vlan_id - Service VLAN ID.
srvviden <id> <mode>
Enable/disable VLAN for this Service.
id - Service ID number.
off - Pass Through
on - VLAN tagged.
syncmode < gps | internal | external >
Select the synchronization mode to use for this unit.
gps - RF transmitters are synchronized to the internal PPS module. The PPS
port operates as an output.
internal - The internal PPS module is synchronized by the installed GPS
module. The RF transmitters are synchronized to the internal PPS module.
The PPS port operates as an output.
external - The PPS module is synchronized by an external PPS signal
received on the PPS port. The RF transmitters are synchronized to the
internal PPS module. The PPS port operates as an input.
syncout < off | on >
Enable or disable the synchronization port (PPS).
off - Synchronization port is disabled.
on - Synchronization port is active. Use this port to receive or transmit PPS
signals (refer to syncmode).
syncterm < none | 50 | 75 >
Enable or disable VLAN for this Service.
none - High impedance.
50 - Port termination impedance is 50 Ohms.
75 - Port termination impedance is 75 Ohms.
syscontact <text>
70-00158-01-08
USER MANUAL
Proprietary Redline Communications © 2011 Page 117 of 150 December 7, 2011