Wireless Security; Fig. 41: Web - Wireless Security Screen - Sector Controller - Redline RDL-3000 SC User Manual

Rdl-3000 family broadband wireless radio platforms
Hide thumbs Also See for RDL-3000 SC:
Table of Contents

Advertisement

RDL-3000 FAMILY
3.5.5

Wireless Security

Click
Configuration->Wireless->Security
Click
to expand or
Encryption Type: Select the encryption type to use for data transmitted over the
wireless interface. If an encryption type is selected, the identical setting must be made
on both communicating units before Ethernet packets can be transferred over-the-air.
None: Encryption is disabled.*
AES 128: Advanced Encryption Standard using 128-bit encryption.
AES 192: Advanced Encryption Standard using 192-bit encryption.
AES 256: Advanced Encryption Standard using 256-bit encryption.
Shared key: Enter the encryption key to be shared between the sector controller and all
subscribers in this sector. This is required only when encryption is enabled.
Shared key confirmation: Re-enter key to minimize errors. This field must be identical
to the Shared Key field.
X.509 Authentication Enable: Check this box
installed X.509 certificate. The user-defined unit certificate, authority certificate, and RSA
private key must be downloaded using the CLI 'load' command.
Note: This dialog item is visible only if enabled by the Options Key and X.509 certificates
are loaded on the RDL-3000.
Fast Registration Enable: Check this box
shared keys for quick authentication of a subscriber (bypass Diffie-Hellman method).
SC MAC: (SS only) Enter the sector controller MAC address to restrict this subscriber to
register only with the specified sector controller.
Enter 00:00:00:00:00:00 to allow the subscriber to connect to any available sector
controller. For example, when using the optional STID template feature. Use colon (:) or
dash (-) as separators.
Apply: Click to activate the security settings displayed on this screen.
Apply & Save All: Click to activate and permanently save the security settings on this
screen. Saved settings are restored on power-up, reboot, or at the end of a test cycle.
70-00158-01-08
USER MANUAL
to hide fields.

Fig. 41: Web - Wireless Security Screen - Sector Controller

Proprietary Redline Communications © 2011
to display the Security Configuration screen.
to require authentication using an
to enable the sector controller to use pre-
Page
70
of 150
December 7, 2011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdl-3000 suRdl-3000 mEnterprise

Table of Contents