RDL-3000 FAMILY
3.4.4
Subscriber Link Status
To view this page on the sector controller click
and click on the Link status symbol (e.g.,
On the subscriber, click
General
Subscriber Link Name: Operator assigned name for this unit.
Subscriber Link ID: A unique identifier (4 to 127) automatically assigned to identify
each subscriber Link (required when using the CLI interface to modify Link settings).
Subscriber IP: (SC only) IP address of this subscriber.
Subscriber MAC: MAC address of this subscriber.
Active: Indicates the status of the wireless link.
No: Wireless link is not active (e.g., the remote end unit may be powered off).
Yes: The subscriber has registered and the wireless link is active. Refer to the Data
Link Condition field on this screen to determine if data can be exchanged across the
wireless interface.
Link Up Time: Time elapsed since the wireless link has been established. This value is
reset each time the link becomes inactive.
Link Lost Count: Number of times the link becomes inactive (out of service).
Status Code: Coded (hexadecimal) indicator for status of this unit. A code of '0x000'
indicates normal operation. See
70-00158-01-08
USER MANUAL
Links Status
Fig. 24: Web - Subscriber: Subscriber Link Status Screen
Status Code Definitions
Proprietary Redline Communications © 2011
Links Summary
) to view data for a specific subscriber.
or
in the main menu.
for further information.
Page
to view all wireless links
45
of 150
December 7, 2011