Setting Up Rapid Auto Provisioning (Rap); Configure Subscriber; Enter The Stid Name And Password; Configure Sector Controller - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY

7.5 Setting Up Rapid Auto Provisioning (RAP)

The RAP feature allows an RDL-3000 subscriber (SS) to establish a wireless link with a
sector controller (SC) without pre-registering the MAC address. A RAP enabled options
key must be entered only on the SC. The operator must login as administrator to install
and configure this feature.
To use this feature, the operator must create an STID (Subscriber Template ID) template
on the SC and enter the wireless link settings to be used for this subscriber. The
operator must also create a Service linked to this template to enable data exchange
between the SC and the SS. During registration, the SS provides the name and
password of the STID template to be used to configure the wireless link. The related
Service is activated automatically after the wireless link is successfully established.

Configure Subscriber

Enter the STID Name and Password

Click Configure -> Wireless.
Enter data for the following fields:
STID: Enter the name of the template to use when registering (e.g., RAP-Eng-Unit).
STID Password: Enter the password for this STID template (e.g., RAP-004).
Click Apply & Save All.

Configure Sector Controller

Step 1: Install RAP Enabled Options Key

Click Utilities -> Product Options.
Enter data for the following fields:
Options Key: Enter the RAP enabled key.
Active Options Key: Select the RAP enabled key (e.g., Options Key 2).
Click Activate.

Step 2: Create an STID Link Template

Click Provisioning->New Subscriber Link.
Enter data for the following fields:
Link Type: Select Template
70-00158-01-08
USER MANUAL

Fig. 60: App. - RAP - SU Wireless Configuration

Proprietary Redline Communications © 2011 Page 146 of 150 December 7, 2011