Redline RDL-3000 SC User Manual page 115

RDL-3000 FAMILY
snmptraplink < off | on>
Enable or disable sending an SNMP trap message for Link-up and Link-down
events.
off - Disable sending the SNMP trap message.
on - Enable sending the SNMP trap message.
snmptraps < off | on>
Enable or disable sending all SNMP traps.
off - Disable sending SNMP trap messages.
on - Enable sending SNMP trap messages.
sntp < off | on>
Enable or disable use of an external a network time service.
off - Disable SNTP protocol support.
on - Enable SNTP protocol support.
sntpip <ip>
Enter the SNTP server IP address. Valid only if SNTP is enabled.
sntppoll <1 - 24>
Enter the SNTP polling interval in hours. Enter period in hours.
srvgid <id> <gid>
Assign a Service Group to this Service.
id - Service ID number.
gid - Service Group ID number.
srvlid <id> <lid>
Assign a Link to this Service.
id - Service ID number.
lid - Link ID number.
srvpri <id> <0 - 7>
Service default priority.
srvvid <id> <1 - 4095>
Set the Service VLAN ID
id - Service reference ID number.
srvviden <id> <off | on>
Enable or disable VLAN connections.
id - Service ID number.
on - VLAN is enabled.
off - VLAN is disabled.
ssh <off | on>
Enable or disable the SSH function (secure telnet for CLI).
off - Disable
on - Enable
sstoss <id> <off | on>
Enable or disable the routing packets between subscribers (hairpinning).
70-00158-01-08
USER MANUAL
Proprietary Redline Communications © 2011 Page 115 of 150 December 7, 2011