Long Reset (Lost Password Or Ip); Long Reset Using Telnet; Fig. 59: Diag. - Recovering Lost Ip Address - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
CLI Parameter
encmode
freq
grpcir
maxtxpower
optionskey
radius
ulcir
ulpir
user
x509auth
1. SNMP v2 only in PMP mode.
2. All user-created accounts are deleted.

5.5 Long Reset (Lost Password or IP)

If the operator can not access the RDL-3000 management interface (unknown IP,
username, and/or password), a long reset operation must be performed to provide
access the unit. The long reset provides an opportunity to login to the RDL-3000 using
the default IP, usernames and passwords. The long reset procedure requires local
access to the RDL-3000 PoE adapter to power-cycle the RDL-3000, and a PC with an
Ethernet cable and a Telnet client or Web browser.

Long Reset Using Telnet

Use the following steps to gain access to the RDL-3000 management interface. It is
recommended to use a clock display on the PC to ensure accurate timing.
Telnet
Power-off the RDL-3000 PoE adapter and remove the local network Ethernet cable.
1.
Use an Ethernet jumper cable to connect the PC directly to the PoE adapter DATA
(INPUT) Ethernet port. Prepare the PC for Telnet access by opening a command
prompt window on the PC and typing the following command (do not press the Enter
key until step 6):
telnet 192.168.25.2
Restore power to the RDL-3000 PoE adapter and wait 10 seconds.
2.
70-00158-01-08
USER MANUAL
Table 24: Diag. - Factory Default Settings
Web Field
Encryption Type
Frequency List
Service UL CIR
Maximum Tx Power
Options Key
RADIUS
Service UL CIR
Service UL PIR
Users Management
screen
X.509 Authentication

Fig. 59: Diag. - Recovering Lost IP Address

Proprietary Redline Communications © 2011
Option Key Def Cfg Button Setting
Y None
No change.
500
10 dBm
No change
Disabled
500
50 000
admin / admin
user/user:
Off
Page 128 of 150
2
December 7, 2011