Wireless; Wireless Packets - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
Active Subscriber Services: The number of Services active on this link.
Data Link Condition: Indicates if data can be transmitted across the wireless link. There
are some conditions where the subscriber can be registered but data can not be
exchanged between the sector controller and the subscriber. For example, encryption is
enabled but keys do not match, or the signal is marginal.
Off: Data can not be exchanged between the sector controller and the subscriber.
On: Data can be exchanged between the sector controller and the subscriber.

Wireless

The following statistics are displayed for the downlink and uplink.
Burst Rate [Mb/s]: The current uplink and downlink uncoded burst rate for the link.
Downlink: Current downlink burst rate.
Uplink: Current uplink burst rate.
RSSI RF1: Received signal strength indicator for RF port 1. In SISO mode, this is always
the value of the active RF port.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
RSSI RF2: Received signal strength indicator for RF port 2. In SISO mode, this is always
the value of the active RF port.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
SINADR RF1: Ratio of the average RF signal strength to interference, noise, and distortion
for RF port 1. In SISO mode, this is always the value of the active RF port.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
SINADR RF2: Ratio of the average RF signal strength to interference, noise, and distortion
for RF port 2. In SISO mode, this is always the value of the active RF port.
Downlink: Reported by the remote end unit.
Uplink: Measured by this unit.
Lost Frames: Number of frames lost.
PIR:
Operator-assigned
Downlink: Operator-assigned downlink Peak Information Rate (PIR) for this link.
Uplink: Operator-assigned uplink Peak Information Rate (PIR) for this link

Wireless Packets

Summary of wireless packet activity on the downlink and uplink.
Total: Total number of packets processed over the wireless interface. Total does not include
discarded and errored packets.
Retransmitted: Total number of wireless packets retransmitted over the wireless interface.
Lost: Total number of wireless packets discarded by this unit due to errors.
Controls
Refresh: Click to update displayed statistics counters.
Reset: Click to reset displayed statistics counters.
70-00158-01-08
USER MANUAL
Peak Information Rate (PIR) for this link.
Proprietary Redline Communications © 2011
.
Page 46 of 150 December 7, 2011