RDL-3000 FAMILY
7 Appendices
7.1 Technical Specifications
RF:
T502 Radio:
RF Band:
Tx Power:
Center Steps:
Channel Size:
Rx Sensitivity:
System Capability:
Ethernet Data Rate:
PoE Cable:
Over The Air Encryption: AES-128, AES 192, and AES-256
Node Authentication:
Network Attributes:
Modulation/Coding:
MAC:
Network Services:
Duplex Technique:
Wireless Transmission:
Network Service:
System Configuration:
Network Management:
Power Requirements:
Operating Temperature: -40 C to 60 C (-40
Dimensions/Weight:
Ingress Protection:
70-00158-01-08
USER MANUAL
Table 30: Spec. - RDL-3000 Technical Specifications
4.940 - 5.875 GHz (TDD)
25 dBm aggregate power max.
4.9 - 5.4 GHz band: 20 dBm per channel max.
5.4 - 5.8 GHz band: 22 dBm per channel max.
2
2.5 MHz
5, 10, 20 MHz (firmware selectable)
-98 dBm @ 3 Mbps max., 5 MHz channel, BPSK
LOS, Optical-LOS, and Non-LOS
> 50 dB Rx Dynamic Range
Maximum Tx Power per Radio: 22 dBm (Ave. Max.)
Minimum Tx Power per Radio: -10 dBm
Dynamic Frequency Selection (DFS)
Automatic link distance ranging
Up to 100 Mbps average rate (20 MHz chan.)
Up to 91.5 m (300 ft)
X.509 certificates
802.3x Ethernet flow control
802.1p priority tagging
Automatic link ranging
DHCP pass-through, Transparent bridge
802.1Q VLAN classification
CIR/PIR Support
BPSK 1/2, QPSK 1/2, 16 QAM 1/2, 16 QAM 3/4, 64 QAM 2/3 and
64 QAM 3/4
Time Division Multiple Access (TDMA)
Automatic Repeat Request (ARQ) error correction (per link)
Dynamic adaptive modulation (per link)
Packet fragmentation, Concatenation
Transparent to 802.3 Services and applications
Dynamic TDD (time division duplex) (per link)
OFDM (orthogonal frequency division multiplexing)
Modes: SISO/MIMO-A, MIMO-A/MIMO-B
10/100 Ethernet (RJ-45)
HTTP/HTTPS (Web) interface, SNMP, SSH, Telnet (CLI), TFTP
SNMP v2c or v3: standard and proprietary MIBs
Standard IEEE 802.3at PoE (25 W max.)
290.7 mm x 268.4 mm x 63.5 mm (11.45 in x 10.57 in x 2.50 in)
IP67
Proprietary Redline Communications © 2011
1
1, 7
1
5
o
o
F to 140
F)
Page
141
Chapter 8
1,3
4
of 150
December 7, 2011