Save; Script; Set - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
stats <id>
Reset statistics for a Service Group, Service, or Link.
id - Specify an ID to reset statistics only for that Service Group, Service, or
4.3.17
Use the save command to copy edited parameter settings into non-volatile memory.
save [option] <Enter>
save <config> <defaultconfig> <idtable> <snmp>
config
Save Ethernet, wireless, and user configuration settings.
defaultconfig
Overwrite parameters with the factory default settings. The following settings are not
affected: system name, location, details and contact, frequency list, SNMP
configuration, and idtable.
idtable
Save current idtable settings (e.g., Service Group, Service, or Link).
snmp
Save current SNMP settings.
4.3.18
Use the script command to save a file containing a string of CLI commands that can be
used to restore the current active configuration of the RDL-3000. The command uses a
TFTP server and the script file is saved in the TFTP default directory. The filename may
be any name and extension valid for the TFTP server platform. Use the
command to restore a saved configuration.
script <server> <name>
server - TFTP server IP address
name - Script file name
IdPwdClearText - Specify if ID template password to be sent in clear text (default).
Note: User account groups, usernames and passwords are not saved by the script
command. Accounts must be created manually by a user using Telnet or a Web
browser. The 'user' set of commands are interactive and can not be automated.
4.3.19
Use the set command to view and/or change a parameter. Use the apply command to
activate changes made using the set command. Use the save command to permanently
save changes (to non volatile RAM).
set <parameter>
activekey <actkey>
Select the active options key (position 1 or 2). Also see ' set optionskey'.
actkey - Optionally enter a new key value.
adaptmod <id><mode>
Enable or disable adaptive modulation for the link
id
mode Enable or disable adaptive modulation for the link.
70-00158-01-08
USER MANUAL
Link. Default is to reset all statistics.

save

script

set

Specify a unique ID for this connection.
Proprietary Redline Communications © 2011
'load
Page 107 of 150 December 7, 2011
script'