Service Group Configuration; Basic Service Group Configuration; Fig. 48: Web - Service Group Configuration Screen - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY

Service Group Configuration

Use this screen to create new Service Groups or view/modify existing Service Groups.
Service Groups
Click
and click on the Service Group name (Name column) to display this screen. Click
expand or

Basic Service Group Configuration

Service Group Name: Enter a unique name to identify this Service group. This identifier
is displayed on configuration and statistics screens. The name may contain up to fifteen
(15) alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Service Group ID: (Read only) A unique identifier assigned to each Service Group (128
to 159). This value is required when using the CLI interface to modify settings.
VLAN Tagging: Select the classification mode for this Service Group.
Tagged: Select tagged to associate a unique VID with this Group.
Pass-through: Classify all packets that do not have a VLAN ID, or where the
outermost VLAN ID tag does not match the VLAN ID for any tagged Group. Ethernet
ingress port are discarded.
802.1q VLAN ID [0-4095]: Enter the VID associated with this Group definition.
70-00158-01-08
USER MANUAL
in the main menu, locate the desired Service Group in the table,
to hide fields.

Fig. 48: Web - Service Group Configuration Screen

Proprietary Redline Communications © 2011 Page 79 of 150 December 7, 2011
to