New User - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
Authentication: Authorization method for the SNMP v3 account. When SNMP v3 is
enabled, an authentication method can be selected to control access from an SNMP-
based network management system.
MD5: MD5 (Message-Digest algorithm 5) is a cryptographic hash function with a
128-bit hash value (RFC 1321).
SHA: SHA (secure Hash Algorithm) is a set of cryptographic hash functions.
Privacy: Privacy method for this account. When SNMP v3 is enabled, a privacy method
can be selected to encrypt messages exchanged with any SNMP-based network
management system.
None: No encryption.
DES: DES (Data Encryption Standard) is an encryption standard.
AES: AES (Advanced Encryption Standard) is an encryption standard.
New Password: Enter the user password for this account. The operator may enter the
existing password or create a new password. New passwords may be 8 to 15 alpha-
numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Confirm Password: Re-enter new user password (if changing user password).
Admin User: Enter the name of the administrator authorizing this change.
Admin Password: Enter the administrator password.
Change: Click to activate and permanently save changes.
Delete: Click to permanently remove the selected account.
IMPORTANT: There must always be at least one 'administrator' account active on the
RDL-3000. You can not manage the RDL-3000 if all accounts are 'user'.

New User

User name: Enter the user name for the new account. Usernames may be 1 to 19
alpha-numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Group: Select the group to be associated with this username.
Authentication: (SNMPv3 only). When SNMP v3 is enabled, an authentication method
can be selected to control access from an SNMP-based network management system.
None: Authentication is not enabled for this account.
MD5: MD5 (Message-Digest algorithm 5) is a cryptographic hash function with a
128-bit hash value (RFC 1321).
SHA: SHA (secure Hash Algorithm) is a set of cryptographic hash functions.
Privacy: (SNMPv3 only). When SNMP v3 is enabled, a privacy method can be selected
to encrypt messages exchanged with any SNMP-based network management system.
None: Privacy is not enabled for this account.
DES: DES (Data Encryption Standard) is an encryption standard.
AES: AES (Advanced Encryption Standard) is an encryption standard.
New Password: Enter the password for this account. Passwords may be 8 to 15 alpha-
numeric characters including a-z, A-Z, 0-9, dash (-), and underscore (_).
Confirm Password: Re-enter the new password.
Admin User: Enter the name of the administrator authorizing this change.
Admin Password: Enter the administrator password.
Add: Click to save changes and activate the new account.
70-00158-01-08
USER MANUAL
Proprietary Redline Communications © 2011 Page 89 of 150 December 7, 2011