RDL-3000 FAMILY
SNMPv2: Edit SNMP Community Settings
Click
Change
community strings or add a new community string.
Index: Display the index reference number for this entry. This value is required when
using the CLI interface to modify SNMP Community settings.
Community Name: Enter or modify the SNMP community name for this entry.
To delete a community string, clear the field (blank) and click
Access: Access permissions for external SNMP client using this entry.
None: Deny read and write for this entry.
Read: Grant only read access for this entry.
Write: Grant only write access for this entry.
Read&Write: Grant read and write access for this entry.
Change Community: Click to accept changes and close this dialog.
IMPORTANT: Clicking Change Community does not activate changes. In the SNMP
Configuration screen, click
and save changes.
SNMP v2: Trap Destination Settings
This section of the SNMP Configuration screen is modified when SNMP v2 is enabled.
This section displays the SNMP trap destination settings. SNMP trap messages inform
network management devices of status changes on the RDL-3000.
IP Address (IPv4): IP address of this trap listener. A copy of each SNMP trap message
is transmitted to this address.
Port: Destination port address of this trap listener.
Community String: Community string associated with this trap listener.
Change: Click to modify (or delete) the existing SNMP community string.
Add: Click to create a new SNMP community string (max. 8 strings).
70-00158-01-08
USER MANUAL
or
Add
in the SNMP Communities section of the screen to modify existing
Fig. 32: Web - SNMP v2: Community Configuration Screen
to activate changes or click
Apply
Fig. 33: Web - SNMP v2: Trap Destinations Screen
Proprietary Redline Communications © 2011
Change Community
to activate
Apply & Save
Page
58
of 150
December 7, 2011
.