Show - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
id - Service ID number.
ulrate <id> <rate>
Set the Link maximum downlink uncoded burst rate.
id = Link ID number.
rate - Minimum downlink rates in MCS (modulation coding scheme).
usrauthmode <local> <radius>
Set the user authentication mode. Specify local services, the RADIUS server, or both
in combination.
local - use local authentication.
radius - Use the RADIUS server.
x509auth <off | on>
Enable or disable authentication.
off - Allow network registrations without authentication.
on - Require authentication using X.509 certificates.
4.3.20
Use the show command to display system statistics.
show <config> <conns> <groups> <files> <idtable> <links> <log> <snmp>
<service> <stats>
config [<id>]
Display system configuration information. When no parameters are entered, the
general configuration settings are displayed (e.g., System Information, Ethernet
Configuration, and Wireless Configuration).
conns <id>
Display the services associated with a Link or Group. Enter the ID of the Group or
Link This command is provided to support script migration from AN-80i systems.
For example:
192.168.25.2(show)# conns 4
files <run | usr>
Display the key and certificate files.
groups
Display information for all Service Groups.
192.168.25.2(show)# groups
idtable
Display information for all system IDs.
192.168.25.2(show)# idtable
70-00158-01-08
SISO/MIMO-A mode - 0 - 7
MIMO-A/MIMO-B mode - 0 - 15

show

<id> If a link ID is specified, the properties of that group are displayed.
id ID of Link or Group.
160 Data A Conn
161 Voice A Conn
run - Display keys currently in use.
usr - Display the user keys and certificates (default).
128 Voice Group
129 Data Group
ID Name Type Status
Proprietary Redline Communications © 2011
USER MANUAL
Page 119 of 150 December 7, 2011