Id Mapping; Table 31: Spec. - Rdl-3000 Id Ranges; Proprietary Redline Communications - Redline RDL-3000 SC User Manual

RDL-3000 FAMILY
Weight:
Storage Temperature:
Compliance:
1
Limited by regional regulations.
2
Center frequency is dependent on region.
3
Maximum power based on radio type, modulation, and coding.
4
Actual Ethernet data throughput is dependent on: protocols, packet size, burst rate, transmission
latency, link distance, and license key options.
5
With surge arrestor installed.
6
Pending.
7
MIMO-A/MIMO-B mode operation with both radios set to 23 dBm.
Specifications are subject to change without notice.
Refer to the RDL-3000 Antenna Guide for a list of supported antennas and mounting brackets.

7.2 ID Mapping

The following table lists the ID ranges assigned for each provisioning type.
Description
Links
Service Groups
Services
70-00158-01-08
USER MANUAL
Table 30: Spec. - RDL-3000 Technical Specifications
2.7 Kg (6 lb) without bracket or antenna
-50 C to 70 C
IEC, EN, and UL/CSA 60950
EN 301 489-1, EN 301 489-17
4.9 GHz: Industry Canada RSS 111
FCC Part 90
5.4 GHz: ETSI EN 301 893 Industry Canada RSS 210
FCC part 15
5.8 GHz: ETSI EN 302 502, Industry Canada RSS 210
FCC part 15
OMAN-TRA
4.9-5.8 GHz R/0062/11 D080214

Table 31: Spec. - RDL-3000 ID Ranges

ID Range
4-127
128-159
160-511
Proprietary Redline Communications © 2011
6
,
6
6
6
Total
123
31
351
Page 142 of 150
6
,
6
,
December 7, 2011