Event Sound Recording - Larson Davis SoundAdvisor 831C Reference Manual

Make Setup Active
FIGURE 18-5 Mark Sound Type
FIGURE 18-6 Mark Sound Type Sound Recording

18.6 Event Sound Recording

To learn more
LEARN MORE
about Event History, see
"Event History" on page 17-1.
SoundAdvisor Model 831C
Step 4 Save.
Step 5 In the Setup Manager, click the soundEx setup and select
Set To Active. Close.
Step 6 Run a measurement.
Step 7 While on Live (Profile) or Time History, navigate Menu
Mark Sound Type.
Step 8 A small overlay will appear on the bottom half of the
screen with a list of all the markers. When one marker is
selected, the recording time begins. When finished, a
sound record is now available marked as Truck.
When an exceedance has been met an event begins, and this event can
also initiate an automatic sound recording. In order to perform this
type of sound recording, follow these steps:
Step 1 If not already created, make a setup file. Follow the steps
in section "Create Setup File".

Event Sound Recording

By selecting a
marker with
sound
recording
enabled, it will
initiate the pre-
trigger followed
by a sound
recording.
18-4