Time; Ntp - Larson Davis SoundAdvisor 831C Reference Manual

9.3 Time

FIGURE 9-2 Set Date/Time & Timezone
Set your time zone first
then select Save.
If you have NTP time it is
not necessary to set this. If
you want to manually set
time and override any
syncing, adjust this and
select Set Time.
To sync the
TAKE NOTE
SoundAdvisor with a PC time,
use G4 LD Utility under the
Maintenance tab of the Meter
Manager. For more
information refer to the G4 LD
Utility Reference Manual.

9.4 NTP

FIGURE 9-3 NTP Servers
SoundAdvisor Model 831C
There are several ways that you can update the time on the meter: GPS,
NTP servers, PC clock, or manually set the time. This page is designed
for the manual set, but is still automatic for daylight savings, just as
long as your timezone is set accurately.
The SoundAdvisor communicates with NTP servers to sync the internal
clock with the most accurate time. This requires a valid internet
connection either through Ethernet, wireless modem, or WiFi.

Time

The time will not update if
the meter is running or
paused. Stop the
measurement before
setting time, otherwise the
time will wait to update
until the next Stop.
Close to save all
changes.
9-2