Enabling Time History; Setting Up The Measurement; Create Time History Setup File - Larson Davis SoundAdvisor 831C Reference Manual

16.3 Enabling Time History

16.4 Setting up the Measurement

16.4.1 Create Time History Setup File

Name the Setup
FIGURE 16-1 Setup File Save As
FIGURE 16-2 Name File
SoundAdvisor Model 831C
To ensure that the Time History option is successfully enabled and
visible, see "Enabling/Disabling Optional Firmware" on page 14-4.
While measurement parameters can be indicated directly in the Active
setup, it is good practice to first create a user-defined setup file for any
specific measurement you perform. Once created, you can make that
setup active. The following section will discuss how to do this.
To create a new setup file, follow these steps
Step 1 Navigate to Tools or Menu  Setup Manager. Arrow
down to Default and press ENTER. A Menu will appear.
Select Save As.
Step 2 Name the file a unique name. This example will use
"tHistoryEx" as the setup file name. OK.

Enabling Time History

16-3