Additional Dosimeter Settings; Setting Event Sound Recording Options - Larson Davis Spartan 730 Reference Manual

Section 6

Additional Dosimeter Settings

In this module:
6.1 Setting Event Sound Recording Options .................................................... 59
6.2 About the Dosimeter Noise Level ............................................................... 62
6.3 Customizing the Dosimeter Name .............................................................. 62
6.4 Setting Date and Time Manually On the Meter .......................................... 63
6.5 Setting Localization Preferences ................................................................ 64
6.5.1 Setting Your Decimal Preference
6.5.2 Setting the Language On the Dosimeter
6.6 Disabling or Enabling Auto Shut-Off ........................................................... 65

6.1 Setting Event Sound Recording Options

Spartan 730/730IS Dosimeter Manual
T
his section provides a reference for additional settings and features, in-
cluding firmware options available for purchase. Some settings listed here
may not be available on your meter.
When you purchase and install the 730-ESR firmware option, event
sound recording enables the dosimeter to produce audio recordings of
measured sound when the sound level exceeds a preset threshold.
Sound recordings are saved as 16-bit WAV files sampled at 8 kHz. The
12-second recording includes 2 seconds of pre-trigger recording and 10
seconds of post-trigger recording. You can use G4 or LD Atlas to listed to
sound recordings.
In this section:
• Part 1: Setting Options for Event Recording
• Part 2: Disabling Event Sound Recording
Setting Options for Event Recording
Part 1:
This section reviews how to set the event sound recording options,
which include the following values: Trigger Source, Trigger Level, and
Minimum Interval.

Setting Event Sound Recording Options

59