Accessibility And Control - Larson Davis SoundAdvisor 831C Reference Manual

Power Control Page
FIGURE 3-6 Power Control Page
Battery "quick look"
You can then use the
top left softkey to
select Off to power
down the meter. This
is the recommended
method to powering
down the meter.
Power Page in System Properties
For more
LEARN MORE
information on the Power
page, see "Power" on page 9-
3.
Power Page on the Live Tab

3.7 Accessibility and Control

SoundAdvisor Model 831C
While the SoundAdvisor is powered on, the Power Control page can be
accessed by pressing the 0 power button once. This is the best way to
turn the meter off. Select Off to safely turn the meter off. Alternatively,
press and hold the 0 power button for three seconds and it will power
down safely.
To change the battery type, auto-off and other features use the Power
page. It can be accessed through the Tools  System Properties.
Under the Live tab, on the last page (a shortcut would be to navigate
"up" instead of "down" on the Live tab to reach the Power page), there
is the Power page. On this page you can see all the battery, voltage, and
memory storage of the SoundAdvisor. Settings cannot be changed,
only viewed on this page. To learn more see 4.3.7 "Power Page" on page
4-6
There are three ways that you can control your meter:
1. The LCD display on the meter will have nearly full control over all
setting and preferences, including running, pausing, stopping, and
storing a measurement.
2. Connect to G4 LD Utility software using a PC through USB
connection or remotely using TCP/IP to fully operate the meter.
3. A Chrome browser on a PC or mobile device can remotely connect
to your meter. Access will be similar to display screen will have. Your
meter will need to be connected to a server with internet access.

Accessibility and Control

Manage the display
brightness and color
theme
The right softkey will
reboot the meter
3-9