Module 6; Additional Dosimeter Settings; Setting Event Sound Recording Options - Larson Davis Spartan 730 Reference Manual

6

Module 6

IN THIS SECTION:
6.1 Setting Event Sound Recording Options - - - - - - - - - - - - - - - - - - - - - - - - - 61
6.2 About the Dosimeter Noise Level - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 63
6.3 Customizing the Dosimeter Name - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 64
6.4 Setting Date and Time Manually On the Meter - - - - - - - - - - - - - - - - - - - - 65
6.5 Setting Localization Preferences - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 66
6.6 Disabling or Enabling Auto Shut-Off - - - - - - - - - - - - - - - - - - - - - - - - - - - - 67
6.7 Troubleshooting Dosimeter Power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 68

6.1 Setting Event Sound Recording Options

Spartan 730/730IS Dosimeter Manual

Additional Dosimeter Settings

This section provides a reference for additional settings and features, including
firmware options available for purchase. Depending on the firmware installed on
your meter, some settings listed here may not be available to you.
When you purchase and install the 730-ESR firmware option, event sound
recording enables the dosimeter to produce audio recordings of measured sound
when the sound level exceeds a preset threshold.
Sound recordings are saved as 16-bit WAV files sampled at 8 kHz. The 12-second
recording includes 2 seconds of pre-trigger recording and 10 seconds of post-
trigger recording. You can use G4 or LD Atlas to listed to sound recordings.
IN THIS SECTION:
• Part 1: Setting Options for Event Recording
• Part 2: Disabling Event Sound Recording
Setting Event Sound Recording Options 61