Module18 Sound Recording; Overview; Enabling Sound Recording Option; Create Setup File - Larson Davis SoundAdvisor 831C Reference Manual

Module18

18.1 Overview ............................................................................................................................18-1

18.2 Enabling Sound Recording Option ...................................................................................18-1

18.3 Create Setup File ...............................................................................................................18-1

18.4 Manual Sound Recording ..................................................................................................18-2
18.5 Marker Sound Recording ..................................................................................................18-3
18.6 Event Sound Recording .....................................................................................................18-4
18.6.1 Measurement History Sound Recording ............................................................18-7
18.7 Sound Recording Range ....................................................................................................18-8
18.7.1 Sound Recording Range Calculation .................................................................18-9
18.7.2 Quality .................................................................................................................18-9
18.8 Sound Recording Playback .............................................................................................18-10
18.8.1 USB Headphone/Speaker .................................................................................18-10
18.8.2 Playback from Session Log ..............................................................................18-10
18.9 Storing Sound Recordings ..............................................................................................18-10
18.9.1 Sound Recording File Size ................................................................................18-11
18.1 Overview
Firmware option
TAKE NOTE
831C-SR must be purchased
and enabled in order to use
this option.
18.2 Enabling Sound Recording Option
18.3 Create Setup File
SoundAdvisor Model 831C
Sound Recording
T
he following module provides the procedures for performing a
sound recording using the Sound Recording option on the
SoundAdvisor.
To ensure that the Sound Recording option is successfully enabled and
visible, see "Enabling/Disabling Optional Firmware" on page 14-4.
While measurement parameters can be indicated directly in the Active
setup, it is good practice to first create a user-defined setup file for any
specific measurement you perform. Once created, you can make that
setup active. The following section will discuss how to do this.
To create a new setup file, follow these steps
Overview 18-1