Measurement History Sound Recording - Larson Davis SoundAdvisor 831C Reference Manual

18.6.1 Measurement History Sound Recording

To learn more
LEARN MORE
about Measurement History,
see "Measurement History"
on page 15-1.
FIGURE 18-10 Sound Recording Control
FIGURE 18-11 Measurement Sound
If compression is selected,
sound recordings are
saved as compressed .ogg
files, reducing the amount
of memory required for
sound recording.
SoundAdvisor Model 831C
You can initiate a sound recording with each new measurement using
the Measurement History option. At the beginning of each new
measurement, a snapshot will record. To create a measurement using
Measurement History and Sound Recording, follow these steps:
Step 1 If not already created, make a setup file. Follow the steps
in section 18.3 Create Setup File on page 18-1.
Step 2 Navigate Setup Manager  Highlight your setup file 
Control.
Step 3 Select a control, in this example Manual Stop will be used.
Step 4 Select Enable Measurement History.
Step 5 Navigate to Sound. Enable Save Measurement Sound.
Event Sound Recording
The snapshot time
(< 9999 s) is the
time in seconds
that will record
after the
measurement
begins.
18-7