Making A Time History Measurement - Larson Davis SoundAdvisor 831C Reference Manual

Specify Time History Options
Review
TRY THIS
"Measurement Setup" on
page 6-1 and indicate all the
parameters for each setup
page that you need for your
measurement.
Time History Time Periods
FIGURE 16-3
Make Setup Active

16.5 Making a Time History Measurement

SoundAdvisor Model 831C
Step 3 With your setup highlighted, use the top right softkey to
navigate to Time History. Check Enable Time History.
Step 4 Indicate the desired time period.
For a list of all the
periods, see "Time
Intervals" on
page 16-1
Step 5 Enable the desired options for the time period. There are
specialized acoustic metrics, octave spectra, and non
acoustical metrics like battery level and weather available.
Not all options will be available for every time period, see
Table 16.1, "Time History Available Metrics," on page 2-16
for a complete list.
Step 6 Save.
Step 7 In the Setup Manager, click the tHistoryEx setup and
select Set To Active.
To begin your measurement, press 9 (RUN/PAUSE) on the meter. For
a basic measurement run overview, see "Making a Measurement" on
page 7-1.

Making a Time History Measurement

16-4