Marker Sound Recording - Larson Davis SoundAdvisor 831C Reference Manual

18.5 Marker Sound Recording

Markers can be
TAKE NOTE
used to simply mark the
sound occurrence with a
name, or when enabled for
sound recording, also initiate
a sound recording. See
"Markers" on page 16-5.
This type of sound
TAKE NOTE
recording is manual and not
automatic.
FIGURE 18-4 Setup Manager Markers
SoundAdvisor Model 831C
Step 3 This menu is used to assign markers to the sound,
however it is also used to manually record. Use the left
softkey to initiate a sound record.
Step 4 To stop recording, select Stop, Close, or stop the
measurement.
In order to identify the source or some other characteristic of a sound
being recorded, then you can use markers and attach one or more to a
sound recording.
These markers can then be used to initiate sound recordings from the
markers setup menu.
To make a sound recording using markers, follow these steps:
Step 1 If not already created, make a setup file. Follow the steps
in section "Create Setup File" on page 18-1..
Step 2 Navigate Setup Manager  Highlight your setup file 
Markers.
Step 3 Choose one or more to enable sound recording. In this
example, Truck marker will be enabled.

Marker Sound Recording

18-3